BioStamp-plus
Features
Specification
| Brand Model | BioStamp-plus |
|---|---|
| CPU | 8 Bit Microcontroller running at 42 MHZ |
| Fingerprint Sensor | Most Rugged and accurate optical finger Print Sensor |
| Resolution | Finger Print reader with 500dpi resolution |
| EER | < 0.1% |
| reader Support | Inbuilt promixity reader(Optical Mifare reader/HID Prox/HOD Class) |
| Verification Time | 1:1 match < 1 sec,1:N Match< 1 sec for less than 1000 templates |
| Template Storage | Non volatile memory to store 1900 finger print templates(expandable up to 9000) |
| Database | 30,000 Employees database |
| Transaction | 55,000 Time Stamped event Storage Capacity |
| Display | Tri color LED indication to Display verification results |
| Communications | 10 Base-T RJ45 ethernet interface(TCP/IP) with Status LED indications |
| Reader Interface | weigand configurable from 26 bits to 40 bits/Clock Data |
| Lock Interface | 1 potential free change over relay,contact rating 3A/30VDC |
| Digital Inputs | One input for Exit Switch/one GPI |
| Digital Outputs | One GPO TTL Level |
| Watchdog | Built-in Watchdog Supervisor |
| Supply Requirement | 12VDC/1A Switch mode supply |
| Power | Less than 5 Watt |
| Enclosure | Plastic Housing with sleek esthetics |
| Input | 180V AC~230V AC/50Hz |
| Humidity | RH 5~95% Non-Condensing |
| Weight | 0.28Kg |
| Dimensions | 15.6cm(L)x6.0cm(W)x4.0cm(D) |
| Specification | Firmware |
| Registration Mode | Support Finger registration either through software or fingerprint USB registration Sensor |
| Two Finger Support | Provision to register two fingers per user |
| Authentication Mode | Only Finger,only card,Card + finger |
| Time Zone | 30 User Defined Time Zones |
| Access Groups | 90 Access Groups |
| Day Access | Day of the Week Access |
| Week off Groups | 30 Week Off Groups |
| Holiday Groups | 10 Holiday Groups,30 Holiday per Group |
| Anti Passback | Door wise Antipassback |
| Interlocking | Interdoor locking Facility Available |