D52
Features
- Progressive Scan CMOS
- Minimum illumination 0.1 Lux at F2.0
- Built-in f3.6 mm / F2.0 Megapixel Fixed lens
- 15 fps at 2048 x 1536 resolution
- Selectable H.264 HP, MJPEG compressions with dual streamings
- Video Motion Detection
- Powered by PoE Class 2
Specification
| Brand Model | D52 | ||||
|---|---|---|---|---|---|
| Device | |||||
| Device Type | Fixed Indoor Dome Camera | ||||
| Image Sensor | Progressive Scan CMOS | ||||
| Day / Night | No | ||||
| Minimum Illumination | Color: 0.1 lux at F2.0 (30 IRE, 2400°K); | ||||
| Mechanical IR Cut Filter | No | ||||
| IR Sensitivity Range | No | ||||
| IR LED | No | ||||
| Electronic Shutter | 1/5 ~ 1/2,000 sec (manual mode); 1/5 ~ 1/10,000 sec (auto mode) | ||||
| Lens | |||||
| Focal Length / Aperture | Fixed focal, f3.6 mm / F2.0 | ||||
| Iris | Fixed iris | ||||
| Focus | Manual Focus | ||||
| Lens Mount | Board Mount | ||||
| Horizontal Viewing Angle | 70.8° | ||||
| Viewing Angle Adjustment | Pan: 0° - 330°; Tilt: 0° - 180° | ||||
| Video | |||||
| Compression | H.264 HP, MJPEG | ||||
| Maximum Frame Rate vs. Resolution | 15 fps at 2048 x 1536; 30 fps at 1920 x 1080(Full HD 1080p); 30 fps at 1280 x 720(HD 720p); 30 fps at 640 x 480(VGA) | ||||
| Multi-Streaming | Simultaneous Dual Streams based on Two Configuration | ||||
| Bit Rate | 28 Kbps - 6 Mbps (per stream) | ||||
| Bit Rate Mode | Constant, Variable | ||||
| Image Enhancement | White balance: automatic, hold, and manual; Brightness; Contrast; Sharpness(auto); Auto gain control; Digital Noice Reduction; Flickerless | ||||
| Privacy Mask | 4 Configurable Regions | ||||
| Text Overlay | User Defind Text on Video | ||||
| Image Orientation | Image Flip and Mirror | ||||
| Network | |||||
| Protocol & Service | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP,IGMP, SMTP, FTP, UPnP, SNMP, Bonjour | ||||
| Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector | ||||
| Security | IP Address Filtering; HTTPS Encryption; Password Protected user levels; IEEE 802.1X network access control | ||||
| Alarm | |||||
| Alarm Trigger | Video motion detection (3 regions) | ||||
| Alarm Response | Notify control center; Change camera settings; Command other devices; E-mail Notification with snapshots; Upload Video, Snapshot to FTP Server | ||||
| General | |||||
| Power Source / Consumption | PoE Class 2 (IEEE802.3af) / 3.79 W | ||||
| Weight | 292 g (0.64 lb) | ||||
| Dimensions (Ø x L) | 128 mm x 99 mm (5.04" x 3.90") | ||||
| Mount Type | Surface, Pendant, Wall, Corner, Pole, Flush | ||||
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) | ||||
| Operating Humidity | 10% ~ 85% RH | ||||
| Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B) | ||||
| Integration | |||||
| Unified Solution | Fully compatible with ACTi software | ||||
| ISV Integration | Software Development Kit (SDK) available; ONVIF compliant | ||||
| Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality); Other browsers with VLC installed (partial functionality) | ||||